Redding Neck Sizer Die Bushing 247 Diameter Titanium Nitride

HOME > RICARICA / RELOADING > ATTREZZATURA / RELOADING GEAR > DIES E ACCESSORI > REDDING > BUSHING >

IL NOSTRO PREZZO: €46.00

Stato del magazzino:esaurito; CONTATTACI tramite email PER CONOSCERE IL TEMPO PREVISTO DI ARRIVO

CODICE ARTICOLO:: RED76247

QUANTITA':

Mandami una email quando sarà disponibile in magazzino

Descrizione

Redding Neck Sizer Bushings freely interchange in all Redding Bushing-Style Sizing Dies. They are available in .001" increments covering all calibers from 17 to 338. By selecting the correct bushing, you are now able to provide just the right amount of neck tension to properly hold the bullet without excessive resizing. All bushings are marked with size identification.

To determine proper Bushing size, measure the outside neck diameter of a loaded cartridge with a precision micrometer, then subtract .001" to .002", to allow for brass spring back and bullet tension. Shellholder and dies sold separately.Made in the USA.

Condividi la tua conoscenza di questo prodotto. Sii il primo a scrivere una recensione »

	TPS BASE XP PER REMINGTON 700 - ACCIAIO - AZIONE LUNGA - DESTRA - 0 MOA - FILETTO VITI (8-40) €133.00
	HARRELLS ANELLI STRAIGHT ALLUMINIO 1" SINGLE SCREW 3/8 - BASSI €147.00
	INNESCHI FEDERAL GM210 MATCH LARGE RIFLE (100pz) €20.00
	Redding Type S Match 6mm PPC Full Bushing Die Set €227.00
	Redding Neck Sizer Die Bushing 330 Diameter Titanium Nitride €51.00
	Lee Auto Prime Hand Priming Tool Shellholder #14 (38-40 Winchester, 44-40 Winchester, 7x65mm Rimmed) €4.00
	TPS ANELLI TSR 1" W - ALLUMINIO - ALTI €73.60
	PALLE HORNADY CAL. 257 75GR V-MAX - 22520 (100pz) €16.00
	Redding Type S Match 6.5mm-284 Norma (6.5mm-284 Winchester) Full Bushing Die Set €320.00