HOME > RICARICA / RELOADING > ATTREZZATURA / RELOADING GEAR > DIES E ACCESSORI > REDDING > BUSHING
Ordina per:
Pagina di 3
Redding Die Locking Ring 7/8"-14 Thread Redding Neck Sizer Die Bushing 263 Diameter Steel
IL NOSTRO PREZZO: €6.00
more info
IL NOSTRO PREZZO: €23.00
more info
Redding Die Locking Ring 7/8"-14 Thread Redding Neck Sizer Die Bushing 263 Diameter Steel
Redding Neck Sizer Die Bushing 234 Diameter Steel Redding Neck Sizer Die Bushing 258 Diameter Titanium Nitride
IL NOSTRO PREZZO: €23.00
more info
IL NOSTRO PREZZO: €37.00
more info
Redding Neck Sizer Die Bushing 234 Diameter Steel Redding Neck Sizer Die Bushing 258 Diameter Titanium Nitride
Redding Neck Sizer Bushings freely interchange in all Redding Bushing-Style Sizing Dies. They are available in .001" increments covering all calibers from 17 to 338. By selecting the correct bushing, you are now able to provide just the right amount of neck tension to properly hold the bullet without excessive resizing. All bushings are marked with size identification.
To determine proper Bushing size, measure the outside neck diameter of a loaded cartridge with a precision micrometer, then subtract .001" to .002", to allow for brass spring back and bullet tension. Shellholder and dies sold separately.Made in the USA.
Redding Neck Sizer Die Bushing 236 Diameter Titanium Nitride Redding Neck Sizer Die Bushing 243 Diameter Titanium Nitride
IL NOSTRO PREZZO: €37.00
more info
IL NOSTRO PREZZO: €37.00
more info
Redding Neck Sizer Die Bushing 236 Diameter Titanium Nitride Redding Neck Sizer Die Bushing 243 Diameter Titanium Nitride
Redding Neck Sizer Bushings freely interchange in all Redding Bushing-Style Sizing Dies. They are available in .001" increments covering all calibers from 17 to 338. By selecting the correct bushing, you are now able to provide just the right amount of neck tension to properly hold the bullet without excessive resizing. All bushings are marked with size identification.

To determine proper Bushing size, measure the outside neck diameter of a loaded cartridge with a precision micrometer, then subtract .001" to .002", to allow for brass spring back and bullet tension. Shellholder and dies sold separately.Made in the USA.
Redding Neck Sizer Bushings freely interchange in all Redding Bushing-Style Sizing Dies. They are available in .001" increments covering all calibers from 17 to 338. By selecting the correct bushing, you are now able to provide just the right amount of neck tension to properly hold the bullet without excessive resizing. All bushings are marked with size identification.

To determine proper Bushing size, measure the outside neck diameter of a loaded cartridge with a precision micrometer, then subtract .001" to .002", to allow for brass spring back and bullet tension. Shellholder and dies sold separately.Made in the USA.
Redding Neck Sizer Die Bushing 244 Diameter Titanium Nitride Redding Neck Sizer Die Bushing 245 Diameter Titanium Nitride
IL NOSTRO PREZZO: €37.00
more info
IL NOSTRO PREZZO: €37.00
more info
Redding Neck Sizer Die Bushing 244 Diameter Titanium Nitride Redding Neck Sizer Die Bushing 245 Diameter Titanium Nitride
Redding Neck Sizer Bushings freely interchange in all Redding Bushing-Style Sizing Dies. They are available in .001" increments covering all calibers from 17 to 338. By selecting the correct bushing, you are now able to provide just the right amount of neck tension to properly hold the bullet without excessive resizing. All bushings are marked with size identification.

To determine proper Bushing size, measure the outside neck diameter of a loaded cartridge with a precision micrometer, then subtract .001" to .002", to allow for brass spring back and bullet tension. Shellholder and dies sold separately.Made in the USA.
Redding Neck Sizer Bushings freely interchange in all Redding Bushing-Style Sizing Dies. They are available in .001" increments covering all calibers from 17 to 338. By selecting the correct bushing, you are now able to provide just the right amount of neck tension to properly hold the bullet without excessive resizing. All bushings are marked with size identification.

To determine proper Bushing size, measure the outside neck diameter of a loaded cartridge with a precision micrometer, then subtract .001" to .002", to allow for brass spring back and bullet tension. Shellholder and dies sold separately.Made in the USA.
Redding Neck Sizer Die Bushing 246 Diameter Titanium Nitride Redding Neck Sizer Die Bushing 247 Diameter Titanium Nitride
IL NOSTRO PREZZO: €37.00
more info
IL NOSTRO PREZZO: €37.00
more info
Redding Neck Sizer Die Bushing 246 Diameter Titanium Nitride Redding Neck Sizer Die Bushing 247 Diameter Titanium Nitride
Redding Neck Sizer Bushings freely interchange in all Redding Bushing-Style Sizing Dies. They are available in .001" increments covering all calibers from 17 to 338. By selecting the correct bushing, you are now able to provide just the right amount of neck tension to properly hold the bullet without excessive resizing. All bushings are marked with size identification.

To determine proper Bushing size, measure the outside neck diameter of a loaded cartridge with a precision micrometer, then subtract .001" to .002", to allow for brass spring back and bullet tension. Shellholder and dies sold separately.Made in the USA.
Redding Neck Sizer Bushings freely interchange in all Redding Bushing-Style Sizing Dies. They are available in .001" increments covering all calibers from 17 to 338. By selecting the correct bushing, you are now able to provide just the right amount of neck tension to properly hold the bullet without excessive resizing. All bushings are marked with size identification.

To determine proper Bushing size, measure the outside neck diameter of a loaded cartridge with a precision micrometer, then subtract .001" to .002", to allow for brass spring back and bullet tension. Shellholder and dies sold separately.Made in the USA.
Redding Neck Sizer Die Bushing 248 Diameter Titanium Nitride Redding Neck Sizer Die Bushing 249 Diameter Titanium Nitride
IL NOSTRO PREZZO: €37.00
more info
IL NOSTRO PREZZO: €37.00
more info
Redding Neck Sizer Die Bushing 248 Diameter Titanium Nitride Redding Neck Sizer Die Bushing 249 Diameter Titanium Nitride
Redding Neck Sizer Bushings freely interchange in all Redding Bushing-Style Sizing Dies. They are available in .001" increments covering all calibers from 17 to 338. By selecting the correct bushing, you are now able to provide just the right amount of neck tension to properly hold the bullet without excessive resizing. All bushings are marked with size identification.

To determine proper Bushing size, measure the outside neck diameter of a loaded cartridge with a precision micrometer, then subtract .001" to .002", to allow for brass spring back and bullet tension. Shellholder and dies sold separately.Made in the USA.
Redding Neck Sizer Bushings freely interchange in all Redding Bushing-Style Sizing Dies. They are available in .001" increments covering all calibers from 17 to 338. By selecting the correct bushing, you are now able to provide just the right amount of neck tension to properly hold the bullet without excessive resizing. All bushings are marked with size identification.

To determine proper Bushing size, measure the outside neck diameter of a loaded cartridge with a precision micrometer, then subtract .001" to .002", to allow for brass spring back and bullet tension. Shellholder and dies sold separately.Made in the USA.
Redding Neck Sizer Die Bushing 251 Diameter Titanium Nitride Redding Neck Sizer Die Bushing 259 Diameter Titanium Nitride
IL NOSTRO PREZZO: €37.00
more info
IL NOSTRO PREZZO: €37.00
more info
Redding Neck Sizer Die Bushing 251 Diameter Titanium Nitride Redding Neck Sizer Die Bushing 259 Diameter Titanium Nitride
Redding Neck Sizer Bushings freely interchange in all Redding Bushing-Style Sizing Dies. They are available in .001" increments covering all calibers from 17 to 338. By selecting the correct bushing, you are now able to provide just the right amount of neck tension to properly hold the bullet without excessive resizing. All bushings are marked with size identification.
To determine proper Bushing size, measure the outside neck diameter of a loaded cartridge with a precision micrometer, then subtract .001" to .002", to allow for brass spring back and bullet tension. Shellholder and dies sold separately.Made in the USA.
Redding Neck Sizer Bushings freely interchange in all Redding Bushing-Style Sizing Dies. They are available in .001" increments covering all calibers from 17 to 338. By selecting the correct bushing, you are now able to provide just the right amount of neck tension to properly hold the bullet without excessive resizing. All bushings are marked with size identification.

To determine proper Bushing size, measure the outside neck diameter of a loaded cartridge with a precision micrometer, then subtract .001" to .002", to allow for brass spring back and bullet tension. Shellholder and dies sold separately.Made in the USA.
Redding Neck Sizer Die Bushing 262 Diameter Titanium Nitride Redding Neck Sizer Die Bushing 265 Diameter Titanium Nitride
IL NOSTRO PREZZO: €37.00
more info
IL NOSTRO PREZZO: €40.00
more info
Redding Neck Sizer Die Bushing 262 Diameter Titanium Nitride Redding Neck Sizer Die Bushing 265 Diameter Titanium Nitride
Redding Neck Sizer Bushings freely interchange in all Redding Bushing-Style Sizing Dies. They are available in .001" increments covering all calibers from 17 to 338. By selecting the correct bushing, you are now able to provide just the right amount of neck tension to properly hold the bullet without excessive resizing. All bushings are marked with size identification.

To determine proper Bushing size, measure the outside neck diameter of a loaded cartridge with a precision micrometer, then subtract .001" to .002", to allow for brass spring back and bullet tension. Shellholder and dies sold separately.Made in the USA.
Redding Neck Sizer Bushings freely interchange in all Redding Bushing-Style Sizing Dies. They are available in .001" increments covering all calibers from 17 to 338. By selecting the correct bushing, you are now able to provide just the right amount of neck tension to properly hold the bullet without excessive resizing. All bushings are marked with size identification.
To determine proper Bushing size, measure the outside neck diameter of a loaded cartridge with a precision micrometer, then subtract .001" to .002", to allow for brass spring back and bullet tension. Shellholder and dies sold separately.Made in the USA.
Redding Neck Sizer Die Bushing 264 Diameter Titanium Nitride Redding Neck Sizer Die Bushing 267 Diameter Titanium Nitride
IL NOSTRO PREZZO: €40.00
more info
IL NOSTRO PREZZO: €40.00
more info
Redding Neck Sizer Die Bushing 264 Diameter Titanium Nitride Redding Neck Sizer Die Bushing 267 Diameter Titanium Nitride
Redding Neck Sizer Bushings freely interchange in all Redding Bushing-Style Sizing Dies. They are available in .001" increments covering all calibers from 17 to 338. By selecting the correct bushing, you are now able to provide just the right amount of neck tension to properly hold the bullet without excessive resizing. All bushings are marked with size identification.
To determine proper Bushing size, measure the outside neck diameter of a loaded cartridge with a precision micrometer, then subtract .001" to .002", to allow for brass spring back and bullet tension. Shellholder and dies sold separately.Made in the USA.
Redding Neck Sizer Bushings freely interchange in all Redding Bushing-Style Sizing Dies. They are available in .001" increments covering all calibers from 17 to 338. By selecting the correct bushing, you are now able to provide just the right amount of neck tension to properly hold the bullet without excessive resizing. All bushings are marked with size identification.

To determine proper Bushing size, measure the outside neck diameter of a loaded cartridge with a precision micrometer, then subtract .001" to .002", to allow for brass spring back and bullet tension. Shellholder and dies sold separately.Made in the USA.
Redding Neck Sizer Die Bushing 268 Diameter Titanium Nitride Redding Neck Sizer Die Bushing 269 Diameter Titanium Nitride
IL NOSTRO PREZZO: €40.00
more info
IL NOSTRO PREZZO: €40.00
more info
Redding Neck Sizer Die Bushing 268 Diameter Titanium Nitride Redding Neck Sizer Die Bushing 269 Diameter Titanium Nitride
Redding Neck Sizer Bushings freely interchange in all Redding Bushing-Style Sizing Dies. They are available in .001" increments covering all calibers from 17 to 338. By selecting the correct bushing, you are now able to provide just the right amount of neck tension to properly hold the bullet without excessive resizing. All bushings are marked with size identification.
To determine proper Bushing size, measure the outside neck diameter of a loaded cartridge with a precision micrometer, then subtract .001" to .002", to allow for brass spring back and bullet tension. Shellholder and dies sold separately.Made in the USA.
Redding Neck Sizer Bushings freely interchange in all Redding Bushing-Style Sizing Dies. They are available in .001" increments covering all calibers from 17 to 338. By selecting the correct bushing, you are now able to provide just the right amount of neck tension to properly hold the bullet without excessive resizing. All bushings are marked with size identification.

To determine proper Bushing size, measure the outside neck diameter of a loaded cartridge with a precision micrometer, then subtract .001" to .002", to allow for brass spring back and bullet tension. Shellholder and dies sold separately.Made in the USA.
   
 

 

Copyright ©  www.gac-rifles.com. P.I. IT03358220980.All Rights Reserved. Built with Volusion