Redding Type S Bushing Full Length Sizer Die 338 Lapua Magnum

HOME > RICARICA / RELOADING > ATTREZZATURA / RELOADING GEAR > DIES E ACCESSORI > REDDING > DIES SINGOLI >

IL NOSTRO PREZZO: €156.00

PREZZO AGGIORNATO: €12,480.00

Stato del magazzino:PRODOTTO DISPONIBILE

CODICE ARTICOLO:: RED77594

QUANTITA':

Descrizione

Full length resizing while maintaining exact control of the case neck is often desirable in one operation. The Type S - Full Length Resizing/Bushing Die accomplishes this task with the precision you would expect from Redding. It uses the same interchangeable bushings (.001" increments) as those used in our bushing style neck sizing dies. The adjustable decapping rod allows you to adjust the bushing position, sizing only part of the neck length when desired. Concentricity is enhanced by the ability of the bushing to self-center on the neck of the cartridge case. All Type S (except 17 and 20 Cal.) dies are supplied with both the standard size button and a decapping pin retainer for the advantages and versatility described under our Type S - Bushing Style Neck Sizing Dies. Note: By removing the bushing and all internal parts, the Type-S full bushing die may also be used as a body die. All dies are supplied without bushings.

Condividi la tua conoscenza di questo prodotto. Sii il primo a scrivere una recensione »

	KEN FARRELL BASE NESIKA J PER OTTICA 0 MOA PICATINNY -DIAMETRO 1.350- €175.50
	€237.00
	€50.00
	€68.00
	MPA STUBBY MONOPOD €129.00
	Butler Creek Tappo Flip Open #15 Objective (Front) €11.00
	€1,100.00
	Butler Creek Tappo Flip Open #44 Objective (Front) €11.00
	Redding Deluxe 3-Die Set 7mm Weatherby Magnum €76.00